Or ScanGear CS are installed in the computer, perform the following to delete When multipleĬanon inkjet printer drivers or Canon scanner drivers such as ScanGear MP Reset Printing System should only be used asĪ "last resort" for troubleshooting a printing issue.Uninstall then reinstall the drivers if error messages occur or if the device does not operate correctly. Or, remove the second cartridge after the first has been removed.Reset Print Center / Reinstall the MP Drivers It may be necessary to reset the Printing System. Remove and replace each cartridge individually.Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area. Press down on the semi-circular tab to release the cartridge and then remove it.The ink cartridge holder moves to the replacement position. After confirming that the printer is powered on, open the scanning unit (printer cover).Wait until the preparatory operation is complete it takes about one to two minutes.Fold the scanning unit support and close the scanning unit (printer cover).The ink cartridge is installed properly. The ink cartridge is not installed properly. Confirm that the ink cartridges are installed properly.(A click sound will be heard when the cartridge is locked in place.) Push up on the front of the cartridge until it locks into place.It does not matter if the capacities (Standard or High) do not match.
*One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*.
Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.
Note: - Do not attempt to reattach the protective tape once you have removed it.
0 kommentar(er)
